2020 Nuhn Magnum Series Top Load

2020 Nuhn Magnum Series Top Load

The Nuhn Magnum top load is the workhorse of the industry. Simple. Rugged. Reliable.

Features may include:

1/4" tanks, long tongue for better handling and visibility, and the heaviest axles and spindles on the market.

All tanks are sandblasted to bare metal, acid washed, coated with epoxy primer and have a urethane top coat.

Provides in-tank agitation without any moving parts. The system includes a front pump sump and the oil bath sealing system allows for a longer seal life.

Creates an even spread from full to empty, and volume control while spreading allowing for additional attachments and a low spread pattern.

• Long tongue for better weight control & balance

• Available capacities: 1,900 - 9,000 us gal

• Power pin hitch

• Delivered ready to use

Nuhn Tensionized Baffles ™, solid unibody construction, double welded, 1/4" tank, strongest undercarriage in the industry, full-length frame with cross members, front and rear clean outdoors, in-tank spray wash system and the bearings positioned away from direct contact with the manure. The volume control feature allows for additional attachments and a low spread pattern, control valve adjusts spread from light to heavy, G-Force tapered bearing and seal system, pressurized unloading creates even spread from full to empty.

Most tanks on the market use a standard PTO shaft. If the tractor turns at 45°, the combination of angles in both universal joints must bend an equivalent of 45°. The best geometry is achieved when the distance between the draw pin and the PTO of the tractor is the same as the distance between the draw pin and the shaft of the spreader pump. This gives 22.5° at both ends. When a long power shaft, such as 48” is used, very little bend happens at the spreader end, and the rest is made up at the tractor end. This creates excessive angles, chattering on turns and shortens PTO life. Also, the PTO in the tractor may be damaged.

The ¼” tank with unibody construction, solid welds inside and out, and full circle tensioned baffles are what makes Nuhn tanks unbeatable. The circular shaped tank keeps the center of gravity low, as opposed to a mushroom shaped tank with the center of gravity very high. The tank has a full light kit, with the lights to the outside of the tires and are designed to break away if they hit something. There is a large clean-out door at the rear of the tank.

The tank has full cross members and a 1/4" solid construction frame. Nuhn full cross members create a cradle for the tank, and bridge the tank and the two side frame pieces together. Other systems with just the two rails and no cross members have no structural integrity between the two rails. The tank also has extra support where tandem joins the frame.

The tank has solid alloy spindles, which are welded directly into the main beam, eliminating weak points. Most tanks in the industry have its spindles mounted with a series of several parts on the end of the beam. This tank also comes with large diamond tread tires and has the heaviest axle in the industry.